| |
|
|
|
|
| General |
|
|
|
|
|
- All G-60 galvannealed Material (Zinc Coated, Resists Rust)
- Sides: Fabricated in (2) pcs. for easy removal
- All wiring in conduit
- Sealed lexan lens ights meet FMVSS 10 specs
- Anti-sail mud flaps
- Hydraulic hoist with power take off
- Safety body prop
- Trailer light connector 6 pole, Elec. back up alarm
- Pintle, or pintle/ball combintation trailer hitch w/tow hooks
- Bodies: mounted, undercoated, cold tar epoxy coating inside chip box, primed and painted
- Stainless steel tool box hinge pins w/ grease fittings
- Tool Boxes "weatherproofed"
- Top includes (4) corner lifting eyes
- Chipper air exhaust vents
|
|
|
|
|
|
| |
|
|
|
|
| Overall Body Dimensions |
|
|
|
|
|
- Length: 168"
- Height: 60"
- Width: 92"
|
|
|
|
|
|
| |
|
|
|
|
| Chip Box Material (Galvannealed) |
|
|
|
|
|
- Floor: 10 ga. plate
- Sides : (Removable) 3' 6" high , (2) pc. design - 12 ga. plate
- Top: (Removable) 10' long , 14 ga. plate
- HeadBoard: (Stationary) 12 ga. plate
- Tailgate: (270 swing) Expanded Metal w/ tubing frame
- Runners: 8" structural channel
- Cross members: 3" structural channel
- Side vertical supports: 3/16" formed channel
|
|
|
|
|
|
| |
|
|
|
|
| Tool Boxes (14-ga. Galvannealed) |
|
|
|
|
|
- Cross Box:
24" Long x 92" x 37" high across chassis rails
Door: 24" long x 48" high; six rope hooks, stationary shelf and water cooler holder (3 gal)
- Underbody tool boxes
(two)48" long x 20" high x 17" deep
- Locks: Slam locks; keyed alike with hidden theft resistant rods
|
|
|
|
|
|
| |
|
|
|
|
| Optional |
|
|
|
|
|
- Tool boxes and step-type rear bumper (behind rear axle 31" long x 20" high x 17" deep)
- Top ladder and pruner rack
- NOTE: Chassis cabs available to complete the package.
102" or 108" C/A Chassis cab required |
|
|
|
|
|
| |
|
|
|
|
| Note |
|
|
|
|
|
Exclusive PPG Automotive Finishes |
|
|
|
|
|
