1. All G-60 galvannealed Material (Zinc Coated, Resists Rust)
2. One piece design in body sides
3. All wiring in conduit
4. Sealed lexan lens lights meet FMVSS 108 specs
5. Anti-sail mud flaps
6. Hydraulic hoist with power take off
7. Safety  body prop
8. Trailer light connector 6 pole
9. Pintle, pin, or pintle/ball combination trailer hitch w/tow hooks
10. Bodies: mounted, undercoated, cold tar epoxy coating inside chip box, primed and painted
11. Stainless steel tool box hinge pins w/ grease fittings
12. Tool Boxes "weatherproof"

1. Length: 146"
2. Height: 60"
3. Width: 92"

1. Floor: 10 ga. plate
2. Sides & Front: (1) pc. design - 12 ga. plate
3. Top: 12 ga. plate
4. Tailgate: (270 swing) 12 ga. plate w/ tubing frame
5. Runners: 8" structural channel
6. Cross members: 3" structural channel
7. Rear vertical support: formed 1/4" plate
8. Rear horizontal support: 4" x 4" x 3/8" tubing

1. Cross box:
   24" long x 92" x 33 1/2" high across chasis rails
   Door: 24" long x 48" high; six rope hooks, stationary shelf and water cooler holder (3 gal)
2. Underbody tool boxes: (two) 55" long x 20" high x 17" deep (w/ aerial unit 43" lg)
3. Ladder box (inside chip box) 122" long x 13" wide x 27" high 
4. Pruner box: (inside chip box) 146" long x 12" wide x 6 1/2" high
5. Locks: T-handle, keyed with hidden theft resistant rods

1. Tool boxes and step-type rear bumper (behind rear axle 31" long x 20" high x 18" deep)
2. NOTE: Chassis cabs available to complete the package.
   84" or 102" C/A chassis cab required 120" C/A required with aerial unit

Exclusive PPG Automotive Finishes